
From data capture to decision support: What does BLUE BOX™ give shipowners?
BLUE BOX™ collects operational data from a vessel’s systems, gives it context and makes it securely available on shore. The data belongs to the shipowner, and BLUE BOX™ is built to make it usable in the tools, systems and solutions the ship owner chooses, for example to reduce fuel consumption, plan maintenance and meet reporting requirements.
Plenty of data, few answers
A modern vessel produces large amounts of data every day, for example temperatures, pressures, fuel flow, power production, alarms, machinery states, navigation data and data from mission equipment. Most of it is already available somewhere on board.
The problem is rarely a lack of data. It is that the data stays on board, spread across different systems, without the context needed to understand it. BLUE BOX™ is built to solve that.
What BLUE BOX™ does
Collects data: BLUE BOX™ connects to the vessel’s automation system and other equipment through standard interfaces, for example NMEA, Modbus, CAN and digital and analogue IO. On vessels that already run X‑CONNECT®, it is a software upgrade with no extra hardware needed. On vessels with other automation systems, a compact hardware unit is enough.

Prepares the data: Instead of streaming every sample, BLUE BOX™ is event-based. A value is sent when it changes by more than a set threshold, and filters, for example averaging, can be applied before the data leaves the vessel. Frequently updated data is matched with information about what each signal represents, so it can be understood later.
Transfers it securely: Data is compressed and encrypted before it is sent ashore. The share of the vessel’s bandwidth that BLUE BOX™ may use can be limited, and it works even on slow connections. If the connection goes down, data is stored on board and sent when the connection is back.

Makes it available: On shore, data is stored in a cloud service with independent security certifications, for example ISO 27001. It can be viewed in the X‑CONNECT® Web Portal, with dashboards, trends and reports, or retrieved through standard interfaces into other tools and systems.
Which signals are collected can be changed remotely from shore, without a service engineer on board.
From data to decisions
Data only becomes useful when it answers a question. BLUE BOX™ is built around three steps.
Data: Signals are collected from across the vessel.
Information: The data is given context. How much fuel was used is one thing. What the vessel was doing at the time, for example transit, dynamic positioning or lying alongside, is what makes it possible to compare and improve.
Decisions: With that context, the crew and the office can see what actually drives fuel consumption, wear and cost, and change how the vessel is operated.

It is worth being clear about one thing: data does not save fuel by itself. People do. In one case, analysis of operational data from a platform supply vessel led to changes in how the vessel was operated, and fuel consumption dropped by around 10 %. BLUE BOX™ provided the information. The crew and the ship owner made the changes.
What the data is used for
Fuel and performance: Following fuel consumption and power use per operating mode, and seeing the effect of changes in operation.
Maintenance planning: Using trends in sensor data, for example temperatures and running hours, to plan maintenance before equipment fails.
Regulatory reporting: Fuel and voyage data can be collected and structured automatically to support reporting schemes such as EU MRV and IMO DCS.
Better vessels: Operational data from vessels in service can be used when designing the next vessel or evaluating new operating modes, closing the loop between design and operation.
Your data, your decision
The ship owner owns the data. Not BLUE BOX™, and not any other supplier. The ship owner decides what is collected, where it is stored, how long it is kept and who gets access.
This is a deliberate choice. The value of operational data rarely comes from one system or one supplier. The same data can be useful for, for example, the technical department, the fleet management system, the maintenance system, an external analytics partner, a research project or the designer of the next vessel. If the data is locked into one platform, most of that value is lost.
BLUE BOX™ is therefore built to share, not to hold on to the data:
Standard interfaces: Data is available through standard database interfaces, for example PostgreSQL and InfluxDB, and through REST APIs.
Any tool: The data can be used directly in common tools such as Power BI, Tableau or Grafana, in the ship owner’s existing fleet and maintenance systems, or in custom analyses, for example written in Python.
Many integrations at once: The same data can feed several solutions in parallel, so the ship owner does not have to choose one supplier to get value from it.
Room to change: If the ship owner changes analytics tool or partner later, the data stays accessible, and the history is not lost.
BLUE BOX™’s job is to make the data available, reliable and easy to use. What the ship owner does with it, and with whom, is the ship owner’s decision.
Sharing data takes more than access
Open interfaces are only part of the answer. For data to be useful across systems and organisations, everyone involved must be willing and able to exchange it, and to do so in a secure and orderly way.
That puts demands on the data itself. It must make sense, meaning each signal comes with information about what it represents, its unit and where it comes from. It must be correct, so that a faulty sensor or a missing value is detected rather than passed on as truth. And it must be usable, in formats and structures that other systems can read without manual rework.
It also puts demands on how the exchange is managed. Access must be controlled, the transfer must be secure, and it must be clear who uses which data and for what.
This is where much of the real work lies, and it is a shared responsibility between ship owners, system suppliers and partners. It requires suppliers who are willing to cooperate rather than protect their own data silos. BLUE BOX™ contributes by giving the data context and structure before it leaves the vessel, by transferring it securely and by making it available through standard, documented interfaces.
What BLUE BOX™ gives the ship owner
Safety: Alarm history and trends are available on shore, so the office can support the crew and follow up on developing issues.
Operational reliability: Early signs of wear and abnormal behaviour can be seen in the data, and maintenance can be planned instead of reacting to breakdowns.
Savings: Better insight into how the vessel is actually operated makes it possible to reduce fuel consumption, and automated reporting saves time on manual data handling.
Modernity: Because the data is open and owned by the ship owner, it can be used for new applications as they appear, for example decision support, remote support and data-driven development, without starting over.
What BLUE BOX™ gives system integrators and partners
Works with any vessel: BLUE BOX™ can be installed on vessels with X‑CONNECT® or third-party automation, and is delivered and supported through a global network of partners.
Open for partners: Standard database interfaces and APIs let partners build their own analyses, integrations and services on top of the data, with the ship owner’s permission.
In short
BLUE BOX™ takes data that is already on board, gives it context and makes it available where decisions are made. The data belongs to the ship owner, and it can be used in whichever tools and solutions create the most value. Since 2018 it has been installed on around 130 vessels. The technology provides the information. The value comes from the people who use it.







